HIT 3: VIRTUAL SIMULATION - 3 MOBILE LASERS & 2 FIXED MOTORIZED LASERS

HIT 3
  • The HIT 3 system consists of three mobile lasers that generate the vertical sagittal line and two horizontal lines, along with two HIT Motorised fixed lasers that generate a vertical line on each side of the patient.
  •  The cross of the line may be red and/or green, changeable at any time.
  • The change from one color to the other is done remotely and instantly.
  • The adjustments of the laser beams are accessible remotely via a Tablet PC and a ZigBee wireless network.
  • The system is coupled to a phantom for the automatic adjustment of the laser beams: Smart Phantom©.

PATIENT POSITIONING LASER SPECIFICATIONS

Red Laser Green Laser
  • Type: Diode
  • Wavelength: 635nm
  • Maximum output power: <1mW
  • Laser Class: Class II
  • Fineness of the line: <1mm
  • Line Length: >3m
  • Type: DPSS
  • Wavelength: 532nm
  • Maximum output power: <1mW
  • Laser Class: Class II
  • Fineness of the line: <1mm
  • Line Length: >3m
Mobile Laser Box Fixed Laser Box
  • Overall Dimensions (HxWxD): 920x105x90mm
  • Weight: 5Kg
  • Power Supply: Internal 110/230 VAC. Consumption <1A
  • Temperature: 15-30°C temperature
  • Type of Control: Motorized, Remote control via a wireless network interface and a Tablet PC ZigBee
  • Accuracy of the isocenter adjustments: +/- 0.1mm
  •  Overall Dimensions (HxWxD): 220x205x110mm
  • Weight: 2Kg
  • Power Supply: Internal 110/230 VAC. Consumption <1A
  • Temperature: 15-30°C temperature
  • Type of Control: Motorized, Remote control via a wireless network interface and a Tablet PC ZigBee
  • Accuracy of the isocenter adjustments: +/- 0.1mm

Page 'Breadcrumb' Navigation:

Back to Top

You currently have Javascript disabled. The site uses Javascript to enhance your user experience (but is not required).
Please enable Javascript in your browser's settings for advanced site-functionality,
or continue browsing the site if you would prefer to continue without Javascript enabled.